Getting Better Indoor TV Antenna Reception

Have you always had static or blurry images when watching television? Or maybe sometimes you miss your favorites shows not because you were not available but because there was a poor reception? And you end up questioning the Antenna’s authenticity.

Most times, it is not the antenna, rather, it’s probably because your Antenna is not positioned well and it is not getting better signal reception from the transmitter. Don’t be despondent, there are still things you can do to get better indoor reception just read on.

During setup of the antenna, location is very important. There’s a 90 percent chance that the problem of reception from your antenna is as a reason of its poor location.

Analyze the Field

This is very imperative during setup because reception also depends on proximity to the transmitter. This might be the issue why people living in isolated regions have reception issues. Each antenna can also act as a receptor that’s why it’s best to stay in the town or city.

The reception also depends on the terrain and surrounding i.e. houses, trees, tall buildings, and other structures. These structures could obstruct transmitted signals so get a good antenna preferably a multidirectional antenna that can still trap dispersed signals from different directions. Try as many antennas as possible, you could buy from retailers that have a return policy and warranty too. You can also go for PrimeCable indoor TV antenna; they are known for their high quality and could be easily used indoors.

Height is Key

The higher your antenna, the better. Your antenna’s height is one of the significant factors required in getting better reception. This is why antenna mounted on roofs and tall buildings are more efficient than indoor models.

Place your antenna at you window panes or on your rooftop and be sure that it is not obstructed by neighbor houses, trees or other tall structures. If you must place it indoors, why not hang it on the ceiling or other high inconspicuous locations so reception can be facilitated.

Use an Amplifier

There are now modern antennas that help boost signal strength from towers or transmitters. This can be helpful in remote places that are far from the tower. If you also want to split the signal to feed two televisions, you can still use an amplifier.

Be careful as these amplifiers may also amplify noise and other signal distortions that come with the signal. It’s best you try first without the amp and observe. If the signal’s good you need not use an amp.

Just adhere to the following tips and experience TV reception like never before.

About Stanley Nathaniel